Commit before going wild

.gitignore

@@ -0,0 +1 @@
+.venv/

README

@@ -0,0 +1 @@
+ansible-playbook -i inventory/ setup.yaml --vault-password-file=vaultpassword.sh

ansible/assets/01-netcfg.yaml.j2

@@ -5,8 +5,8 @@ network:
       addresses:
       - {{ pi_ip }}/{{ pi_mask }}
       nameservers:
-        search: [injust.us]
+        search: [{{ pi_searchdomains }}]
-        addresses: [127.0.0.1, 1.1.1.1]
+        addresses: [127.0.0.1, {{pi_additional_upstream_dnsservers}}]
       routes:
         - to: default
-          via: 10.11.1.1
+          via: {{ pi_gateway }}

ansible/assets/ddclient.conf.j2

@@ -0,0 +1,374 @@
+######################################################################
+##
+## Define default global variables with lines like:
+## 	var=value [, var=value]*
+## These values will be used for each following host unless overridden
+## with a local variable definition.
+##
+## Define local variables for one or more hosts with:
+## 	var=value [, var=value]* host.and.domain[,host2.and.domain...]
+##
+## Lines can be continued on the following line by ending the line
+## with a \
+##
+##
+## Warning: not all supported routers or dynamic DNS services
+##          are mentioned here.
+##
+######################################################################
+daemon=300				# check every 300 seconds
+syslog=yes				# log update msgs to syslog
+mail=root				# mail all msgs to root
+mail-failure=root		# mail failed update msgs to root
+pid=@runstatedir@/ddclient.pid		# record PID in file.
+ssl=yes					# use ssl-support.  Works with
+						# ssl-library
+# postscript=script		# run script after updating.  The
+						# new IP is added as argument.
+#
+#use=watchguard-soho,        fw=192.168.111.1:80	# via Watchguard's SOHO FW
+#use=netopia-r910,           fw=192.168.111.1:80	# via Netopia R910 FW
+#use=smc-barricade,          fw=192.168.123.254:80	# via SMC's Barricade FW
+#use=netgear-rt3xx,          fw=192.168.0.1:80		# via Netgear's internet FW
+#use=linksys,                fw=192.168.1.1:80		# via Linksys's internet FW
+#use=maxgate-ugate3x00,      fw=192.168.0.1:80		# via MaxGate's UGATE-3x00  FW
+#use=elsa-lancom-dsl10,      fw=10.0.0.254:80		# via ELSA LanCom DSL/10 DSL Router
+#use=elsa-lancom-dsl10-ch01, fw=10.0.0.254:80		# via ELSA LanCom DSL/10 DSL Router
+#use=elsa-lancom-dsl10-ch02, fw=10.0.0.254:80		# via ELSA LanCom DSL/10 DSL Router
+#use=alcatel-stp,            fw=10.0.0.138:80           # via Alcatel Speed Touch Pro
+#use=xsense-aero,            fw=192.168.1.1:80          # via Xsense Aero Router
+#use=allnet-1298,            fw=192.168.1.1:80          # via AllNet 1298 DSL Router
+#use=3com-oc-remote812,	     fw=192.168.0.254:80	# via 3com OfficeConnect Remote 812
+#use=e-tech,                 fw=192.168.1.1:80          # via E-tech Router
+#use=cayman-3220h,           fw=192.168.0.1:1080        # via Cayman 3220-H DSL Router
+#
+#fw-login=admin,             fw-password=XXXXXX		# FW login and password
+#
+## To obtain an IP address from FW status page (using fw-login, fw-password)
+#use=fw, fw=192.168.1.254/status.htm, fw-skip='IP Address' # found after IP Address
+#
+## To obtain an IP address from Web status page (using the proxy if defined)
+## by default, checkip.dyndns.org is used if you use the dyndns protocol.
+## Using use=web is enough to get it working.
+## WARNING: set deamon at least to 600 seconds if you use checkip or you could
+## get banned from their service.
+#use=web, web=checkip.dyndns.org/, web-skip='IP Address' # found after IP Address
+#
+#use=ip,                     ip=127.0.0.1	# via static IP's
+#use=if,                     if=eth0		# via interfaces
+#use=web					# via web
+#
+#protocol=dyndns2				# default protocol
+#proxy=fasthttp.sympatico.ca:80			# default proxy
+#server=members.dyndns.org			# default server
+#server=members.dyndns.org:8245			# default server (bypassing proxies)
+
+#login=your-login				# default login
+#password=test					# default password
+#mx=mx.for.your.host				# default MX
+#backupmx=yes|no				# host is primary MX?
+#wildcard=yes|no				# add wildcard CNAME?
+
+##
+## dyndns.org dynamic addresses
+##
+## (supports variables: wildcard,mx,backupmx)
+##
+# server=members.dyndns.org,		\
+# protocol=dyndns2			\
+# your-dynamic-host.dyndns.org
+
+##
+## dyndns.org static addresses
+##
+## (supports variables: wildcard,mx,backupmx)
+##
+# static=yes,				\
+# server=members.dyndns.org,		\
+# protocol=dyndns2			\
+# your-static-host.dyndns.org
+
+##
+## dyndns.org custom addresses
+##
+## (supports variables: wildcard,mx,backupmx)
+##
+# custom=yes,				\
+# server=members.dyndns.org,		\
+# protocol=dyndns2			\
+# your-domain.top-level,your-other-domain.top-level
+
+##
+## ZoneEdit (zoneedit.com)
+##
+# server=dynamic.zoneedit.com, 		\
+# protocol=zoneedit1,			\
+# login=your-zoneedit-login,  		\
+# password=your-zoneedit-password	\
+# your.any.domain,your-2nd.any.dom
+
+##
+## EasyDNS (easydns.com)
+##
+# server=members.easydns.com, 		\
+# protocol=easydns,			\
+# login=your-easydns-login,  		\
+# password=your-easydns-password	\
+# your.any.domain,your-2nd.any.domain
+
+##
+## dslreports.com dynamic-host monitoring
+##
+# server=members.dslreports.com		\
+# protocol=dslreports1,			\
+# login=dslreports-login,		\
+# password=dslreports-password		\
+# dslreports-unique-id
+
+##
+## OrgDNS.org account-configuration
+##
+# use=web, web=members.orgdns.org/nic/ip
+# protocol=dyndns2
+# server=www.orgdns.org 		\
+# login=yourLoginName 			\
+# password=yourPassword 		\
+# yourSubdomain.orgdns.org
+
+##
+## NameCheap (namecheap.com)
+##
+# protocol=namecheap,                     \
+# server=dynamicdns.park-your-domain.com,	\
+# login=example.com,                      \
+# password=example.com-password           \
+# subdomain.example.com
+
+##
+## NearlyFreeSpeech.NET (nearlyfreespeech.net)
+##
+# protocol = nfsn,                      \
+# login=member-login,                   \
+# password=api-key,                     \
+# zone=example.com                      \
+# example.com,subdomain.example.com
+
+##
+## Loopia (loopia.se)
+##
+# use=web, web=loopia
+# protocol=dyndns2
+# server=dns.loopia.se
+# script=/XDynDNSServer/XDynDNS.php
+# login=my-loopia.se-login
+# password=my-loopia.se-password
+# my.domain.tld,other.domain.tld
+
+##
+## NoIP (noip.com)
+##
+# protocol=noip,                        \
+# ssl=yes,                              \
+# server=dynupdate.no-ip.com,           \
+# login=your-noip-login,                \
+# password=your-noip-password,          \
+# your-host.domain.com, your-2nd-host.domain.com
+
+##
+## ChangeIP (changeip.com)
+##
+## single host update
+# protocol=changeip,                   \
+# login=my-my-changeip.com-login,      \
+# password=my-changeip.com-password    \
+# myhost.changeip.org
+
+##
+## CloudFlare (www.cloudflare.com)
+##
+#protocol=cloudflare,        \
+#zone=domain.tld,            \
+#ttl=1,                      \
+#login=your-login-email,     \ # Only needed if you are using your global API key. If you are using an API token, set it to "token" (without double quotes).
+#password=APIKey             \ # This is either your global API key, or an API token. If you are using an API token, it must have the permissions "Zone - DNS - Edit" and "Zone - Zone - Read". The Zone resources must be "Include - All zones".
+#domain.tld,my.domain.tld
+
+##
+## Gandi (gandi.net)
+##
+## Single host update
+# protocol=gandi,                      \
+# zone=example.com,                    \
+# password=my-gandi-api-key,           \
+# ttl=3h                               \
+# myhost.example.com
+
+##
+## Google Domains (www.google.com/domains)
+##
+# protocol=googledomains,
+# login=my-auto-generated-username,
+# password=my-auto-generated-password
+# my.domain.tld, otherhost.domain.tld
+
+##
+## Duckdns (http://www.duckdns.org/)
+##
+#
+# protocol=duckdns, \
+# password=my-auto-generated-password \
+# hostwithoutduckdnsorg
+
+##
+## Freemyip (http://freemyip.com/)
+##
+#
+# protocol=freemyip,
+# password=my-token
+# myhost
+
+##
+## MyOnlinePortal (http://myonlineportal.net)
+##
+# # ipv6=yes # optional
+# use=web, web=myonlineportal.net/checkip
+# # use=if, if=eth0     # alternative to use=web
+# # if-skip=Scope:Link  # alternative to use=web
+# protocol=dyndns2
+# ssl=yes
+# login=your-myonlineportal-username
+# password=your-myonlineportal-password
+# domain.myonlineportal.net
+
+##
+## nsupdate.info IPV4(https://www.nsupdate.info)
+##
+#use=web, web=http://ipv4.nsupdate.info/myip
+#protocol=dyndns2
+#server=ipv4.nsupdate.info
+#login=domain.nsupdate.info
+#password='123'
+#domain.nsupdate.info
+
+##
+## nsupdate.info IPV6 (https://www.nsupdate.info)
+## ddclient releases <= 3.8.1 do not support IPv6
+##
+#usev6=if, if=eth0
+#protocol=dyndns2
+#server=ipv6.nsupdate.info
+#login=domain.nsupdate.info
+#password='123'
+#domain.nsupdate.info
+
+##
+## Yandex.Mail for Domain (domain.yandex.com)
+##
+# protocol=yandex,                      \
+# login=domain.tld,                     \
+# password=yandex-pdd-token             \
+# my.domain.tld,other.domain.tld        \
+
+##
+## DNS Made Easy (https://dnsmadeeasy.com)
+##
+# protocol=dnsmadeeasy,
+# login=your-account-email-address
+# password=your-generated-password
+# your-numeric-record-id-1,your-numeric-record-id-2,...
+
+##
+## OVH DynHost (https://ovh.com)
+##
+# protocol=ovh,
+# login=example.com-dynhostuser,
+# password=your_password
+# test.example.com
+
+##
+## Porkbun (https://porkbun.com/)
+##
+protocol=porkbun
+apikey={{ porkbun_api_key }}
+secretapikey={{ porkbun_secret_api_key }}
+*.home.coxgrunow.ca
+#on-root-domain=yes example.com,sub.example.com
+#host.example.com,host2.sub.example.com
+#on-root-domain=yes example.com,sub.example.com
+
+##
+## ClouDNS (https://www.cloudns.net)
+##
+# protocol=cloudns, \
+# dynurl=https://ipv4.cloudns.net/api/dynamicURL/?q=Njc1OTE2OjY3Njk0NDM6YTk2, \
+# myhost.example.com
+
+##
+## dinahosting (https://dinahosting.com)
+##
+# protocol=dinahosting, \
+# login=myusername,     \
+# password=mypassword   \
+# myhost.mydomain.com
+
+##
+## dnsexit (www.dnsexit.com)
+##
+#protocol=dnsexit,                                            \
+#login=myusername,                                            \
+#password=mypassword,                                         \
+#subdomain-1.domain.com,subdomain-2.domain.com
+
+##
+## dnsexit2 (API method www.dnsexit.com)
+##
+#protocol=dnsexit2
+#password=MyAPIKey
+#subdomain-1.domain.com,subdomain-2.domain.com
+
+##
+## domeneshop (www.domeneshop.no)
+##
+# protocol=domeneshop
+# login=<token>
+# password=<secret>
+# subdomain-1.domain.com,subdomain-2.domain.com
+
+##
+## Njal.la (http://njal.la/)
+##
+# protocol=njalla,
+# password=mypassword
+# quietreply=no|yes
+# my-domain.com
+
+##
+## regfish.de (www.regfish.de/)
+##
+# protocol=regfishde,
+# password=mypassword
+# my-domain.com
+
+##
+## Enom (www.enom.com)
+##
+# protocol=enom,
+# login=domain.name,
+# password=domain-password
+# my-domain.com
+
+##
+## DigitalOcean (www.digitalocean.com)
+##
+#protocol=digitalocean, \
+#zone=example.com,      \
+#password=api-token     \
+#example.com,sub.example.com
+
+##
+## Infomaniak (www.infomaniak.com)
+##
+# protocol=infomaniak,
+# login=ddns_username,
+# password=ddns_password
+# example.com

ansible/assets/docker-compose.yml.j2

@@ -0,0 +1,207 @@
+version: "3.5"
+
+# https://github.com/pi-hole/docker-pi-hole/blob/master/README.md
+
+networks:
+  network_pihole:
+    ipam:
+      driver: default
+      config:
+        - subnet: 172.16.3.0/24
+
+services:
+  nginx-proxy:
+    image: nginxproxy/nginx-proxy
+    ports:
+      - '80:80'
+    environment:
+      DEFAULT_HOST: {{ pihole_hostname }}.{{ pihole_domain }}
+    volumes:
+      - '/var/run/docker.sock:/tmp/docker.sock'
+    restart: always
+    networks:
+      network_pihole:
+        ipv4_address: 172.16.3.6
+
+
+  pihole:
+    image: pihole/pihole:latest
+    ports:
+      - '53:53/tcp'
+      - '53:53/udp'
+      - "67:67/udp"
+      - '8053:80/tcp'
+    networks:
+      network_pihole:
+        ipv4_address: 172.16.3.2
+    volumes:
+      - './etc-pihole:/etc/pihole'
+      - './etc-dnsmasq.d:/etc/dnsmasq.d'
+      # run `touch ./var-log/pihole.log` first unless you like errors
+      # - './var-log/pihole.log:/var/log/pihole/pihole.log'
+    # Recommended but not required (DHCP needs NET_ADMIN)
+    #   https://github.com/pi-hole/docker-pi-hole#note-on-capabilities
+    cap_add:
+      - NET_ADMIN
+    expose:
+      - 80
+    environment:
+      ServerIP: 10.11.1.10
+      PIHOLE_DNS_: unbound#53;{{ pihole_additional_upstream_dnsservers }}
+      PROXY_LOCATION: {{ pihole_hostname }}
+      VIRTUAL_HOST: {{ pihole_hostname}}.{{ pihole_domain }}
+      VIRTUAL_PORT: 80
+      WEBPASSWORD: {{ pihole_password }}
+      FTLCONF_LOCAL_IPV4: {{ pi_ip }}
+      DNSMASQ_LISTENING: all
+
+    extra_hosts:
+      # Resolve to nothing domains (terminate connection)
+      - 'nw2master.bioware.com nwn2.master.gamespy.com:0.0.0.0'
+      # LAN hostnames for other docker containers using nginx-proxy
+      - 'yourDomain.lan:192.168.41.55'
+      - '{{ pihole_hostname }} {{ pihole_hostname }}.{{ pihole_domain }}:{{ pi_ip }}'
+      - 'citadel.tedupnorth.com:10.10.10.10'
+      - 'postgres postgres.injust.us:10.11.1.14'
+      - 'proxmox proxmox.injust.us:10.11.1.5'
+      - 'omv omv.injust.us:10.11.1.12'
+      - 'docker-int docker-int.injust.us:10.11.1.13'
+      - 'docker-ext docker-ext.injust.us:10.11.1.15'
+      - 'linkwarden linkwarden.injust.us:10.11.1.15'
+      - 'linkwarden.coxgrunow.ca:10.11.1.15'
+      - 'wiki.mycomputer.party:10.11.1.15'
+      - 'wiki.coxgrunow.ca:10.11.1.15'
+      - 'paperless.injust.us:10.11.1.13'
+      - 'wiki.injust.us:10.11.1.13'
+      - 'testweb.injust.us:10.11.1.13'
+      - 'stalwart.mycomputer.party:10.11.1.15'
+      - 'linkace.mycomputer.party:10.11.1.15'
+      - 'linkding.mycomputer.party:10.11.1.15'
+      - 'wallabag.mycomputer.party:10.11.1.15'
+      - 'test.mycomputer.party:10.11.1.15'
+      - 'matrix matrix.mycomputer.party:10.11.1.16'
+      - 'wiki wiki.injust.us:10.11.1.13'
+
+
+    restart: always
+
+  unbound:
+    image: klutchell/unbound
+    volumes:
+      - ./unbound:/etc/unbound/unbound.conf.d
+    ports:
+      - '5335:53/tcp'
+      - '5335:53/udp'
+    restart: always
+    networks:
+      network_pihole:
+        ipv4_address: 172.16.3.3
+
+  porkbunddns:
+      image: pavlinchen/porkbun-ddns
+      container_name: porkbun-ddns
+      restart: always
+      pull_policy: always
+      environment:
+          APIKey: {{ porkbun_api_key }}
+          SecretAPIKey: {{ porkbun_secret_api_key }}
+          Domain: {{ porkbun_domain }}
+          Schedule: "{{ porkbun_cron_sched }}"
+          TZ: {{ porkbun_tz }}
+      networks:
+        network_pihole:
+          ipv4_address: 172.16.3.4
+
+  porkbunddns2:
+      image: pavlinchen/porkbun-ddns
+      container_name: porkbun-ddns2
+      restart: always
+      pull_policy: always
+      environment:
+          APIKey: {{ porkbun_api_key }}
+          SecretAPIKey: {{ porkbun_secret_api_key }}
+          Domain: {{ porkbun_domain2 }}
+          Schedule: "{{ porkbun_cron_sched }}"
+          TZ: {{ porkbun_tz }}
+      networks:
+        network_pihole:
+          ipv4_address: 172.16.3.7
+
+  ddclient:
+    image: lscr.io/linuxserver/ddclient:latest
+    container_name: ddclient
+    environment:
+      - PUID=1000
+      - PGID=1000
+      - TZ=Etc/UTC
+    volumes:
+      - ./ddclient/:/config
+    restart: unless-stopped
+
+  wireguard:
+    depends_on: 
+      - pihole
+    networks:
+      network_pihole:
+        ipv4_address: 172.16.3.5
+    image: lscr.io/linuxserver/wireguard:latest
+    container_name: wireguard
+    cap_add:
+      - NET_ADMIN
+      - SYS_MODULE
+    environment:
+      - PUID=0
+      - PGID=0
+      - TZ=Canada/Eastern
+      - SERVERURL=vpn.coxgrunow.ca
+      - SERVERPORT=51820
+      - PEERS=phone,tedupnorth #oAdded Docker tags to Ansible playbookptional
+      - PEERDNS=172.16.3.2 #optional
+      - INTERNAL_SUBNET=10.11.4.0 #optional
+      - ALLOWEDIPS=10.11.1.0/24,172.16.3.2 #optional
+      - SERVER_ALLOWEDIPS_PEER_tedupnorth=10.10.0.0/16
+      - PERSISTENTKEEPALIVE_PEERS=all #optional - for dynamic DNS
+      - LOG_CONFS=true #optional
+    volumes:
+      - ./wireguard/config:/config
+      - /lib/modules:/lib/modules #optional
+    ports:
+      - 51820:51820/udp
+    sysctls:
+      - net.ipv4.conf.all.src_valid_mark=1
+    restart: unless-stopped
+
+#   Another container you might want to have running through the proxy
+#   Note it also have ENV Vars like pihole and a host under pihole's extra_hosts
+#  ghost:
+#    image: fractalf/ghost
+#    ports:
+#      - '2368:2368/tcp'
+#    volumes:
+#      - '/etc/ghost:/ghost-override'
+#    environment:
+#      PROXY_LOCATION: ghost
+#      VIRTUAL_HOST: ghost.yourDomain.lan
+#      VIRTUAL_PORT: 2368
+#    restart: always
+
+#  homeassistant:
+#      container_name: homeassistant
+#      image: "ghcr.io/home-assistant/home-assistant:stable"
+#      volumes:
+#        - ./homeassistant/config:/config
+#        - /etc/localtime:/etc/localtime:ro
+#      restart: unless-stopped
+#      privileged: true
+#      network_mode: host
+#      #environment:
+#      #  - VIRTUAL_HOST=homeassistant.coxgrunow.ca
+#      #  - VIRTUAL_PORT=8123
+  yacy:
+    container_name: yacy
+    image: "docker.io/yacy/yacy_search_server:aarch64-latest"
+    volumes:
+      - ./yacy:/opt/yacy_search_server/DATA
+    ports:
+      - 8090:8090/tcp
+      - 8443:8443/tcp

ansible/assets/unbound.conf.j2

@@ -36,8 +36,8 @@ server:
     # when fragmentation does work, it may not be secure; it is theoretically
     # possible to spoof parts of a fragmented DNS message, without easy
     # detection at the receiving end. Recently, there was an excellent study
-    # >>> Defragmenting DNS - Determining the optimal maximum UDP response size for DNS <<<
+    # Defragmenting DNS - Determining the optimal maximum UDP response size for DNS <
-    # by Axel Koolhaas, and Tjeerd Slokker (https://indico.dns-oarc.net/event/36/contributions/776/)
+    ### by Axel Koolhaas, and Tjeerd Slokker (https://indico.dns-oarc.net/event/36/contributions/776/)
     # in collaboration with NLnet Labs explored DNS using real world data from the
     # the RIPE Atlas probes and the researchers suggested different values for
     # IPv4 and IPv6 and in different scenarios. They advise that servers should

ansible/inventory/host_vars/basementpi.local/vars

@@ -0,0 +1,19 @@
+---
+pi_ip: 10.11.1.10
+pi_mask: 255.255.255.0
+pi_gateway: 10.11.1.1
+pi_searchdomains: injust.us
+# Comma separated, e.g.: 1.1.1.1,8.8.8.8
+pi_additional_upstream_dnsservers: 1.1.1.1
+# Semicolon separated, e.g.: 1.1.1.1;8.8.8.8
+pihole_additional_upstream_dnsservers: 1.1.1.1
+pihole_password: "{{ vault_pihole_password }}"
+pihole_hostname: pihole
+pihole_domain: injust.us
+
+porkbun_api_key: pk1_6e6d69e80434b0aa61727637f5d7f71713f505a65004567bc8f5e34b8e516d4b
+porkbun_secret_api_key: "{{ vault_porkbun_secret_api_key }}"
+porkbun_domain: mycomputer.party justus
+porkbun_domain2: coxgrunow.ca *
+porkbun_cron_sched: "*/5 * * * *"
+porkbun_tz: Canada/Eastern

ansible/inventory/host_vars/basementpi.local/vault

@@ -0,0 +1,12 @@
+$ANSIBLE_VAULT;1.1;AES256
+64353737376438383965326136653836383636656437633234356664643732636338336164343862
+3965626430323133666566313831393938346261366634650a316664633739353663353866326565
+31663635393533316138333333373465643364386163326165633036613331363938336133643166
+6166396537313761640a623865326663666238376265353438383330663338356535373836396639
+38326139373435336237656234333837393931323561323332666237373339306638303563393834
+34363039336634393239373262663034336363313736356534353233623731643735303661393937
+33633933323632356537616663633736643132656561393631653363306261613362356664633565
+33636664373331336333623839323434386632343534656563386339303537366265323361313039
+38353664333461336332353962643233626564303863333132323366383264653937656635353265
+36346161613961363964663265393439383934313130363436653666623664303031373435326265
+393931643933363936336161356636313338

ansible/inventory/hosts

@@ -0,0 +1,2 @@
+[rasperrypi]
+basementpi.local ansible_host=10.11.1.10 ansible_ssh_user=root

ansible/setup-vm.yaml

@@ -0,0 +1,89 @@
+---
+- name: Setup
+  hosts: all
+  remote_user: root
+  vars:
+
+  tasks:
+    - name: Disable cloud-init network config
+      ansible.builtin.command: 'echo "network: {config: disabled}" > /etc/cloud/cloud.cfg.d/99-disable-network-config.cfg'
+
+    - name: Delete existing netplan
+      ansible.builtin.command: rm -f /etc/netplan/*
+     
+    - name: Copy netplan
+      ansible.builtin.template:
+        src: assets/01-netcfg.yaml.j2
+        dest: /etc/netplan
+
+    - name: Copy unbound config
+      ansible.builtin.template:
+        src: assets/unbound.conf.j2
+        dest: ./unbound/
+      tags: vm
+
+    - name: Apply Netplan
+      ansible.builtin.command: netplan apply
+
+    - name: Docker Prereqs
+      ansible.builtin.apt:
+        update_cache: true
+        name:
+          - ca-certificates
+          - curl
+          - gnupg
+          - lsb-release
+    - name: Create keyring directory
+      ansible.builtin.file:
+        path: /etc/apt/keyrings
+        state: directory
+    - name: Create Docker directory
+      ansible.builtin.file:
+        path: /root/docker
+        state: directory
+    - name: Download Docker GPG keys
+      ansible.builtin.shell: curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo gpg --dearmor -o /etc/apt/keyrings/docker.gpg --batch --yes
+    - name: Add Docker repo
+      ansible.builtin.shell: echo "deb [arch=$(dpkg --print-architecture) signed-by=/etc/apt/keyrings/docker.gpg] https://download.docker.com/linux/ubuntu $(lsb_release -cs) stable" | sudo tee /etc/apt/sources.list.d/docker.list > /dev/null
+
+    - name: Disable Ubunut stub DNS resolver
+      ansible.builtin.shell: sed -r -i.orig 's/#?DNSStubListener=yes/DNSStubListener=no/g' /etc/systemd/resolved.conf
+    - name: symlink /etc/resolv to /run/systemd/resolve/resolv.conf
+      ansible.builtin.shell: sudo sh -c 'rm /etc/resolv.conf && ln -s /run/systemd/resolve/resolv.conf /etc/resolv.conf'
+
+    - name: Restart resolved
+      ansible.builtin.shell: systemctl restart systemd-resolved
+
+    - name: Install restic
+      ansible.builtin.apt:
+        update_cache: true
+        name:
+          - restic
+      
+    - name: Install Docker
+      ansible.builtin.apt:
+        update_cache: true
+        name:
+          - docker-ce
+          - docker-ce-cli
+          - containerd.io
+          - docker-compose-plugin
+
+    - name: Copy Docker Compose file
+      ansible.builtin.template:
+        src: assets/docker-compose.yml.j2
+        dest: /root/docker/docker-compose-wg.yml
+      tags: wireguard,docker,vm
+
+    - name: Copy ddclient config
+      ansible.builtin.template:
+        src: assets/ddclient.conf.j2
+        dest: /root/docker/ddclient/ddclient.conf
+      tags: docker,vm
+
+
+    - name: Run Docker
+      ansible.builtin.shell: docker compose up -d --remove-orphans
+      args:
+        chdir: /root/docker
+      tags: wireguard,docker

ansible/setup.yaml

@@ -3,11 +3,6 @@
   hosts: all
   remote_user: root
   vars:
-    pi_ip: 10.11.1.10
-    pihole_additional_upstream_dnsservers: 1.1.1.1
-    pihole_password: password!
-    pihole_hostname: pihole
-    pihole_domain: injust.us
 
   tasks:
     - name: Disable cloud-init network config
@@ -17,12 +12,13 @@
       ansible.builtin.command: rm -f /etc/netplan/*
      
     - name: Copy netplan
-      ansible.builtin.copy:
+      ansible.builtin.template:
-        src: configfiles/01-netcfg.yaml
+        src: assets/01-netcfg.yaml.j2
         dest: /etc/netplan
+
     - name: Copy unbound config
-      ansible.builtin.copy:
+      ansible.builtin.template:
-        src: configfiles/unbound.conf
+        src: assets/unbound.conf.j2
         dest: ./unbound/
 
     - name: Apply Netplan
@@ -57,6 +53,12 @@
     - name: Restart resolved
       ansible.builtin.shell: systemctl restart systemd-resolved
 
+    - name: Install restic
+      ansible.builtin.apt:
+        update_cache: true
+        name:
+          - restic
+      
     - name: Install Docker
       ansible.builtin.apt:
         update_cache: true
@@ -70,8 +72,17 @@
       ansible.builtin.template:
         src: assets/docker-compose.yml.j2
         dest: /root/docker/docker-compose.yml
+      tags: wireguard,docker
+
+    - name: Copy ddclient config
+      ansible.builtin.template:
+        src: assets/ddclient.conf.j2
+        dest: /root/docker/ddclient/ddclient.conf
+      tags: docker
+
 
     - name: Run Docker
-      ansible.builtin.shell: docker compose up -d
+      ansible.builtin.shell: docker compose up -d --remove-orphans
       args:
         chdir: /root/docker
+      tags: wireguard,docker

ansible/vaultpassword.sh

@@ -0,0 +1,2 @@
+#!/bin/bash
+bw get password b0297774-6cf6-4858-9b77-af910022dd78

inventory/inventory.yaml

@@ -1,3 +0,0 @@
-all:
-  hosts:
-    basementpi.local

playbooks/assets/docker-compose.yml.j2

@@ -1,74 +0,0 @@
-version: "3"
-
-# https://github.com/pi-hole/docker-pi-hole/blob/master/README.md
-
-services:
-  nginx-proxy:
-    image: nginxproxy/nginx-proxy
-    ports:
-      - '80:80'
-    environment:
-      DEFAULT_HOST: {{ pihole_hostname }}.{{ pihole_domain }}
-    volumes:
-      - '/var/run/docker.sock:/tmp/docker.sock'
-    restart: always
-
-  pihole:
-    image: pihole/pihole:latest
-    ports:
-      - '53:53/tcp'
-      - '53:53/udp'
-      - "67:67/udp"
-      - '8053:80/tcp'
-    volumes:
-      - './etc-pihole:/etc/pihole'
-      - './etc-dnsmasq.d:/etc/dnsmasq.d'
-      # run `touch ./var-log/pihole.log` first unless you like errors
-      # - './var-log/pihole.log:/var/log/pihole/pihole.log'
-    # Recommended but not required (DHCP needs NET_ADMIN)
-    #   https://github.com/pi-hole/docker-pi-hole#note-on-capabilities
-    cap_add:
-      - NET_ADMIN
-    expose:
-      - 80
-    environment:
-      ServerIP: 10.11.1.10
-      PIHOLE_DNS_: unbound#53;{{ pihole_additional_upstream_dnsservers }}
-      PROXY_LOCATION: {{ pihole_hostname }}
-      VIRTUAL_HOST: {{ pihole_hostname}}.{{ pihole_domain }}
-      VIRTUAL_PORT: 80
-      WEBPASSWORD: {{ pihole_password }}
-      FTLCONF_LOCAL_IPV4: {{ pi_ip }}
-
-    extra_hosts:
-      # Resolve to nothing domains (terminate connection)
-      - 'nw2master.bioware.com nwn2.master.gamespy.com:0.0.0.0'
-      # LAN hostnames for other docker containers using nginx-proxy
-      - 'yourDomain.lan:192.168.41.55'
-      - '{{ pihole_hostname }} {{ pihole_hostname }}.{{ pihole_domain }}:{{ pi_ip }}'
-    restart: always
-
-  unbound:
-    image: klutchell/unbound
-    volumes:
-      - ./unbound:/etc/unbound/unbound.conf.d
-    ports:
-      - '5335:53/tcp'
-      - '5335:53/udp'
-    restart: always
-
-
-
-#   Another container you might want to have running through the proxy
-#   Note it also have ENV Vars like pihole and a host under pihole's extra_hosts
-#  ghost:
-#    image: fractalf/ghost
-#    ports:
-#      - '2368:2368/tcp'
-#    volumes:
-#      - '/etc/ghost:/ghost-override'
-#    environment:
-#      PROXY_LOCATION: ghost
-#      VIRTUAL_HOST: ghost.yourDomain.lan
-#      VIRTUAL_PORT: 2368
-#    restart: always

playbooks/configfiles/01-netcfg.yaml

@@ -1,12 +0,0 @@
-network:
-  version: 2
-  ethernets:
-    eth0:
-      addresses:
-        - 10.11.1.10/24
-      nameservers:
-        search: [injust.us]
-        addresses: [127.0.0.1, 1.1.1.1]
-      routes:
-        - to: default
-          via: 10.11.1.1

playbooks/configfiles/unbound.conf

@@ -1,67 +0,0 @@
-server:
-    # If no logfile is specified, syslog is used
-    # logfile: "/var/log/unbound/unbound.log"
-    verbosity: 0
-
-    interface: 127.0.0.1
-    port: 53
-    do-ip4: yes
-    do-udp: yes
-    do-tcp: yes
-
-    # May be set to yes if you have IPv6 connectivity
-    do-ip6: no
-
-    # You want to leave this to no unless you have *native* IPv6. With 6to4 and
-    # Terredo tunnels your web browser should favor IPv4 for the same reasons
-    prefer-ip6: no
-
-    # Use this only when you downloaded the list of primary root servers!
-    # If you use the default dns-root-data package, unbound will find it automatically
-    #root-hints: "/var/lib/unbound/root.hints"
-
-    # Trust glue only if it is within the server's authority
-    harden-glue: yes
-
-    # Require DNSSEC data for trust-anchored zones, if such data is absent, the zone becomes BOGUS
-    harden-dnssec-stripped: yes
-
-    # Don't use Capitalization randomization as it known to cause DNSSEC issues sometimes
-    # see https://discourse.pi-hole.net/t/unbound-stubby-or-dnscrypt-proxy/9378 for further details
-    use-caps-for-id: no
-
-    # Reduce EDNS reassembly buffer size.
-    # IP fragmentation is unreliable on the Internet today, and can cause
-    # transmission failures when large DNS messages are sent via UDP. Even
-    # when fragmentation does work, it may not be secure; it is theoretically
-    # possible to spoof parts of a fragmented DNS message, without easy
-    # detection at the receiving end. Recently, there was an excellent study
-    # >>> Defragmenting DNS - Determining the optimal maximum UDP response size for DNS <<<
-    # by Axel Koolhaas, and Tjeerd Slokker (https://indico.dns-oarc.net/event/36/contributions/776/)
-    # in collaboration with NLnet Labs explored DNS using real world data from the
-    # the RIPE Atlas probes and the researchers suggested different values for
-    # IPv4 and IPv6 and in different scenarios. They advise that servers should
-    # be configured to limit DNS messages sent over UDP to a size that will not
-    # trigger fragmentation on typical network links. DNS servers can switch
-    # from UDP to TCP when a DNS response is too big to fit in this limited
-    # buffer size. This value has also been suggested in DNS Flag Day 2020.
-    edns-buffer-size: 1232
-
-    # Perform prefetching of close to expired message cache entries
-    # This only applies to domains that have been frequently queried
-    prefetch: yes
-
-    # One thread should be sufficient, can be increased on beefy machines. In reality for most users running on small networks or on a single machine, it should be unnecessary to seek performance enhancement by increasing num-threads above 1.
-    num-threads: 1
-
-    # Ensure kernel buffer is large enough to not lose messages in traffic spikes
-    so-rcvbuf: 1m
-
-    # Ensure privacy of local IP ranges
-    private-address: 192.168.0.0/16
-    private-address: 169.254.0.0/16
-    private-address: 172.16.0.0/12
-    private-address: 10.0.0.0/8
-    private-address: fd00::/8
-    private-address: fe80::/10
-

playbooks/dockercompose/docker-compose.yml

@@ -1,76 +0,0 @@
-version: "3"
-
-# https://github.com/pi-hole/docker-pi-hole/blob/master/README.md
-
-services:
-  nginx-proxy:
-    image: nginxproxy/nginx-proxy
-    ports:
-      - '80:80'
-    environment:
-      DEFAULT_HOST: pihole.injust.us
-    volumes:
-      - '/var/run/docker.sock:/tmp/docker.sock'
-    restart: always
-
-  pihole:
-    image: pihole/pihole:latest
-    ports:
-      - '53:53/tcp'
-      - '53:53/udp'
-      - "67:67/udp"
-      - '8053:80/tcp'
-    volumes:
-      - './etc-pihole:/etc/pihole'
-      - './etc-dnsmasq.d:/etc/dnsmasq.d'
-      # run `touch ./var-log/pihole.log` first unless you like errors
-      # - './var-log/pihole.log:/var/log/pihole/pihole.log'
-    # Recommended but not required (DHCP needs NET_ADMIN)
-    #   https://github.com/pi-hole/docker-pi-hole#note-on-capabilities
-    cap_add:
-      - NET_ADMIN
-    expose:
-      - 80
-    environment:
-      ServerIP: 10.11.1.10
-      PIHOLE_DNS_: 127.0.0.1#5053;1.1.1.1
-      PROXY_LOCATION: pihole
-      VIRTUAL_HOST: pihole.injust.us
-      VIRTUAL_PORT: 80
-      WEBPASSWORD: password
-      FTLCONF_LOCAL_IPV4: 10.11.1.10
-
-    extra_hosts:
-      # Resolve to nothing domains (terminate connection)
-      - 'nw2master.bioware.com nwn2.master.gamespy.com:0.0.0.0'
-      # LAN hostnames for other docker containers using nginx-proxy
-      - 'yourDomain.lan:192.168.41.55'
-      - 'pihole pihole.injust.us:10.11.1.10'
-      - 'ghost ghost.yourDomain.lan:192.168.41.55'
-      - 'wordpress wordpress.yourDomain.lan:192.168.41.55'
-    restart: always
-
-  unbound:
-    image: klutchell/unbound
-    volumes:
-      - ./unbound:/etc/unbound/unbound.conf.d
-    ports:
-      - '5335:53/tcp'
-      - '5335:53/udp'
-    restart: always
-
-
-
-#   Another container you might want to have running through the proxy
-#   Note it also have ENV Vars like pihole and a host under pihole's extra_hosts
-#  ghost:
-#    image: fractalf/ghost
-#    ports:
-#      - '2368:2368/tcp'
-#    volumes:
-#      - '/etc/ghost:/ghost-override'
-#    environment:
-#      PROXY_LOCATION: ghost
-#      VIRTUAL_HOST: ghost.yourDomain.lan
-#      VIRTUAL_PORT: 2368
-#    restart: always